<?xml version="1.0" encoding="utf-8"?>
<ResourceDictionary xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation" xmlns:s="clr-namespace:System;assembly=mscorlib" xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml" xml:space="preserve"><s:String x:Key="DPTightResultLang">Tightening Result:</s:String><s:String x:Key="AddrCahngedLang2">Do you want to reconnect</s:String><s:String x:Key="ClearAlarmLang">Alarm clear</s:String><s:String x:Key="ElectronicGearRatioNumeratorLangZ">Electronic gear ratio numerator(P03-40)</s:String><s:String x:Key="SpeedCommandSelectionLangZ">Speed command selected(P04-00)</s:String><s:String x:Key="RightJOGRunLang">Right JOG...</s:String><s:String x:Key="SpeedCommandDigitalUnitAndRangeLangZ_Rotate">(Unit：rpm ____ Range：-6000-6000)</s:String><s:String x:Key="PowerOnDINoteLangZ">The selected functions, once activated, remain in an active state after power-up, and are no longer influenced by the status of the DI interface.</s:String><s:String x:Key="CommSlaveWarnLang">Automatic connection detection finished.Communication failure. Please check the serial port configuration.Possible errors:
1.Wrong serial port number or station number;
2、Other errors.</s:String><s:String x:Key="DeleteCustomParaWarnLang">Do you want to delete a custom pameter group?</s:String><s:String x:Key="HelpFileLang">User's Manual</s:String><s:String x:Key="Channel1Lang">Channel 2</s:String><s:String x:Key="PSTStructionSelectItem1ReLang">Suitable for adjusting mechanisms with low rigidity, such as bet mechanisms</s:String><s:String x:Key="SetValue2Lang">Setting value:</s:String><s:String x:Key="RightShiftLang">Right Shift</s:String><s:String x:Key="RepetitionLang">The sampling channel name cannot be duplicated.Please reset it.</s:String><s:String x:Key="AmplitLang">Amplitude</s:String><s:String x:Key="AntiExternalTorqueLimitRangeLangZ">(Range：-300-0)</s:String><s:String x:Key="TriCondi5Lang">Below Horizontal</s:String><s:String x:Key="PositionCommandLangZ_Line">Position Command Source(P03-00)</s:String><s:String x:Key="StopBitsLang">Stop Bit</s:String><s:String x:Key="BusCommandLangZ">2: BusCommand</s:String><s:String x:Key="OnlyParamReadFailedLang">Parameter upload failed.</s:String><s:String x:Key="AddTableLang">Add new table</s:String><s:String x:Key="SpeedControlTitleLangZ">&lt; Speed Mode &gt;</s:String><s:String x:Key="ElectronicGearRatioDenominatorLangZ">Electronic gear ratio denominator(P03-42)</s:String><s:String x:Key="InstructionUnitLangZ_Line">Encoder unit</s:String><s:String x:Key="ForwardSpeedLimitLangZ_Line">Forward speed limit(P04-06)</s:String><s:String x:Key="ContinuePointLang">Continuous single point</s:String><s:String x:Key="OnSamLang">In the sampling...</s:String><s:String x:Key="JOGTitleLang">Linear servo pilot run</s:String><s:String x:Key="ControlModeSettingLangZ">ControlMode
Setting</s:String><s:String x:Key="NoFaultLang">No fault</s:String><s:String x:Key="SaveSuccessLang">The file was saved successfully.The address is as follows:</s:String><s:String x:Key="DO0D">0x0D(13)：预留</s:String><s:String x:Key="SaveAsParamItemLang">Do you want to save the drop-down box parameters file as well?</s:String><s:String x:Key="Machine517">Serovo electric screwdriver</s:String><s:String x:Key="MachineCodeNullLang">The product code cannot be empty.</s:String><s:String x:Key="PosDeviationLang">Positional deviation(/P)</s:String><s:String x:Key="MeasurementReasultLang">Step 3:Measurement reasult</s:String><s:String x:Key="AntiExternalTorqueLimitLangZ">Negative internal torque(P05-11)</s:String><s:String x:Key="StopLang">Stop</s:String><s:String x:Key="NoTriggerLang">No Trigger</s:String><s:String x:Key="DO0B">0x0B(11)：预留</s:String><s:String x:Key="UseAin_1LangZ">0：Use Ain_0(Speed Analog Command)</s:String><s:String x:Key="PositionTorqueControlTitleLangZ">&lt; Position/Torque Mode &gt;</s:String><s:String x:Key="Assignment7Lang">Task 7</s:String><s:String x:Key="ExcelVersionLang">EXCEL Version</s:String><s:String x:Key="AccSpeedLang">Acceleration</s:String><s:String x:Key="HistoryAlarmLang">Historical alarm</s:String><s:String x:Key="AllBatchParamDownOkLang">All parameter are downloaded successfully.Power on an restart.</s:String><s:String x:Key="DecSpeedLang">Deleration</s:String><s:String x:Key="OpenFileLang">Open parameter file</s:String><s:String x:Key="ReserveLangZ">1: Reserve</s:String><s:String x:Key="MotorInstallationGuideLang">MotorInstallationGuide</s:String><s:String x:Key="DeteTableLang">Delete this table</s:String><s:String x:Key="isCommunicationLang">In Communiction.</s:String><s:String x:Key="IsStartInertiaRatioLang">Do you want to start inertia identification?</s:String><s:String x:Key="UploadToolTipLang">Read all parameter values of the drive.</s:String><s:String x:Key="InertiaRatioOperatorWarnLang">Precautions for inertia identification：
1.No-load test run shall be carried out before equipment installation to avoid accidents.
2.There is no potiontial safety hazard in the operating environment and the machine can be stopped at any time.
3.Relevant parameters of the drive are set properly.</s:String><s:String x:Key="Step2TipLang">Set relevent motion parameters for JOG</s:String><s:String x:Key="OnlineUpdateSoftWareLang">Software</s:String><s:String x:Key="AllAxisLang">ALL axis</s:String><s:String x:Key="SpeedCommandDigitalUnitAndRangeLangZ">(Unit: rpm ____ Range: -6000-6000)</s:String><s:String x:Key="IOSetLang">IO seting</s:String><s:String x:Key="Machine518">General servo-R/RC Bus</s:String><s:String x:Key="SmingNullWarnLang">The sampling channel cannot be empty!!!
 Please select the sampling channel.</s:String><s:String x:Key="AssignmentParamFileLang">Multi task parameter file</s:String><s:String x:Key="OutRangeLang">Out of strage range.</s:String><s:String x:Key="OneMotorRevolutionPositionCommandsNumLangZ_Line">The number of command pulses for one rotation of the motor(P03-09)</s:String><s:String x:Key="MPATestModeLang">Test Mode</s:String><s:String x:Key="ImportLangLang">Exports the current language dictionary</s:String><s:String x:Key="UintLang">Uint</s:String><s:String x:Key="NoMaxScrrenLang">Cancel full scrren</s:String><s:String x:Key="NoneLang">None</s:String><s:String x:Key="ValidAtFallingEdgeLangZ">2: Falling edge triggered</s:String><s:String x:Key="InstructionPulseFormLangZ_Line">Pulse width modulation(P03-01)</s:String><s:String x:Key="OutputPulseDivisionRatioDenominatorRangeLangZ">(Range：1-65535)</s:String><s:String x:Key="SpeedCommandDigitalUnitAndRangeLangZ_Line">(Unit：mm/s ____ Range：-6000-6000)</s:String><s:String x:Key="PSTMoveDistanceRotateLang">(Loops)</s:String><s:String x:Key="StartLang">Start</s:String><s:String x:Key="WarnIndexFileLang">Warning\Failed Index File</s:String><s:String x:Key="DeveModePasswardLang">Please enter the developer mode password:</s:String><s:String x:Key="FunctionLang">Function</s:String><s:String x:Key="ParamInfoPathLang">English</s:String><s:String x:Key="DI17">0x17(23): Invert Speed Simulation Command</s:String><s:String x:Key="ImportFailedWarnLang">Language file import failed.</s:String><s:String x:Key="DI09">0x09(9): Gain Switch</s:String><s:String x:Key="StopMonitoLang">Stop Monitor</s:String><s:String x:Key="AssignmentNumLang">Task Num</s:String><s:String x:Key="LanguageLang">Language</s:String><s:String x:Key="OnlyParamWriteFailedLang">Parameter download failed.Please check whether the set value is out of range.</s:String><s:String x:Key="NextLangZ">Next</s:String><s:String x:Key="SamFreLang">Sampling Frequency</s:String><s:String x:Key="OTUseP01-21LockLangZ">1: Use P01-21 setting to stop motor, then servo lock</s:String><s:String x:Key="TorqueControlSpeedLimitLangZ">Torque control speed limit value(P05-02)</s:String><s:String x:Key="CustomTranFileang">2.Customize XML file to Excel file</s:String><s:String x:Key="ForwardSpeedLimitUnitAndRangeLangZ">(Unit: rpm ____ Range: 0-6300)</s:String><s:String x:Key="QuadraturePulseCommandLangZ">0: Quadrature Pulse Command</s:String><s:String x:Key="IntegratedStepperTypeLang">Integrated</s:String><s:String x:Key="ReverseDirectionLangZ">1: Negation</s:String><s:String x:Key="InputParaFailedLang">Failed to import file.</s:String><s:String x:Key="G1UseDBKeepDBLangZ">0: Use DB to stop motor, then keep DB</s:String><s:String x:Key="SelectAxisLang">Select the axis that you need to import.</s:String><s:String x:Key="PowerOnDITitleLangZ">&lt; Power On Active DI Function &gt;</s:String><s:String x:Key="SeriesLang">Series</s:String><s:String x:Key="SelectAxisFileLang">Please select the axis parameters that the current drive needs to import:</s:String><s:String x:Key="HideGroupLang">Hide parameter group</s:String><s:String x:Key="SetpointOfP05-02LangZ">1: P05-02 setting value</s:String><s:String x:Key="SaveLang">Save</s:String><s:String x:Key="PSTStructionSelectItem2Lang">2: Ball screw mechanism</s:String><s:String x:Key="TorqueColumnLang">Torque(%)</s:String><s:String x:Key="TorqueModeSettingBtnLangZ">TorqueMode
Setting</s:String><s:String x:Key="StrartMonitoringLang">Start Monitor</s:String><s:String x:Key="MoveUpLang">Move up</s:String><s:String x:Key="CurrLoopLang">Current loop</s:String><s:String x:Key="CurrAxisLang">Current axis</s:String><s:String x:Key="FreedomDPStartLang">Start Freedom</s:String><s:String x:Key="DimensionLang">Dimension</s:String><s:String x:Key="ImportSystemFileLang">1.Export all system files</s:String><s:String x:Key="AdvancedSettingLangZ">高级设置</s:String><s:String x:Key="MPACurrentOverLimitWarnLang">Current amplitude setting is out of range, please retype and try again</s:String><s:String x:Key="ImportParasLang">Import Parameters</s:String><s:String x:Key="StartMeasurementLang">Start Measurement</s:String><s:String x:Key="PSTStructionSelectLang">Struction</s:String><s:String x:Key="AssignmentDebugLang">Task Debug</s:String><s:String x:Key="IntertiaIdenLang">Manual inertia identification</s:String><s:String x:Key="WarnInfoFileLang">Warning\Failed Descrption File</s:String><s:String x:Key="FactoryValueLang">Factory set value</s:String><s:String x:Key="ParaSelftuningLang">Parameter Self-tuning</s:String><s:String x:Key="MutiAxisAssistFunLang">Explain:
F03.Ai1 Analog Input 1 Automatic Zero Drift Calibration (VCMD)&gt;&gt;&gt;Click "Analog Input 1 Automatic Zero Drift Calibration (VCMD)"to confirm the opreation.Wait for the enf of the progress bar opreation to complete the Analog Input 1 Automatic Zero Drift Calibration (VCMD).

F04.Ai2 Analog Input 2 Automatic Zero Drift Calibration (TCMD)&gt;&gt;&gt;Click "Analog Input 2 Automatic Zero Drift Calibration (TCMD)"to confirm the opreation.Wait for the enf of the progress bar opreation to complete the Analog Input 2 Automatic Zero Drift Calibration (TCMD).

F05.Ai3 Automatic zero drift compensation of current sensor&gt;&gt;&gt;Click "Automatic zero drift compensation of current sensor"to confirm the opreation.Wait for the enf of the progress bar opreation to complete the Automatic zero drift compensation of current sensor(opreation in inactive state).

F06.En0	 Absolute Encoder Fault Clearing Click&gt;&gt;&gt;"Absolute Encoder Fault Clearing"to confirm the opreation.Wait for the enf of the progress bar opreation to complete the Absolute Encoder Fault Clearing(opreation in inactive state).

F07.En1	Absolute Encoder Multi-Loop Zeroing&gt;&gt;&gt;Click "Absolute Encoder Multi-Loop Zeroing"to confirm the opreation.Wait for the enf of the progress bar opreation to complete the Absolute Encoder Multi-Loop Zeroing(opreation in inactive state).

F10.ini	Restore factory parameters&gt;&gt;Click "Restore factory parameters"to confirm the opreation.Wait for the enf of the progress bar opreation to complete the Restore factory parameters.
 
F17.rES Software Reset&gt;&gt;&gt;Click "Software Reset"to confirm the opreation.Wait for the enf of the progress bar opreation to complete the Software Reset.

F12.Clr Alarm record clearing&gt;&gt;&gt;Click "Alarm record clearing"to confirm the opreation.Wait for the enf of the progress bar opreation to complete the alarm record clearing.
    
F14.out Forced output port level&gt;&gt;&gt;Click "Forced DO oupput", Software will automatically acquire the current Digital Output status. check the DO ports which you wish to activate. Exiting will terminate this function.</s:String><s:String x:Key="RepeatGoal2Lang">Repeat Goal 2</s:String><s:String x:Key="Machine519">Integrated servo-R/RC Bus</s:String><s:String x:Key="QuickMonitorLang">Custom Monitor</s:String><s:String x:Key="ParamRefreshFailedLang">Parameter update interrupted.</s:String><s:String x:Key="PulseCommandLangZ">0: PulseCommand</s:String><s:String x:Key="DownAddLang">Down to increase</s:String><s:String x:Key="LineOriginRunLang">Origin</s:String><s:String x:Key="HardwareModelLang">Hardware Mode:</s:String><s:String x:Key="AddCustomGroupLang">Add New custom group</s:String><s:String x:Key="Assignment8Lang">Task 8</s:String><s:String x:Key="PosModeLang">Position Mode</s:String><s:String x:Key="LangOutSuccLang">The language dictionary for the current system was exported successfully.The address is as follow：</s:String><s:String x:Key="ForwardDPStartLang">Start Forward</s:String><s:String x:Key="DI10">0x10(16): Position Residue Command Clear</s:String><s:String x:Key="ForcedStopStopMethodLangZ">Forced stop method(P01-20.3)</s:String><s:String x:Key="MeasurementConditionsLang">Step 2:Measurement coditions</s:String><s:String x:Key="InstructionPulseNegationLangZ_Line">Invert pulse command(P03-03)</s:String><s:String x:Key="MechanicalAngelLang">Mechanical angle</s:String><s:String x:Key="ModeSetLang">Mode Setting</s:String><s:String x:Key="TorqueLimitationLang">Torque limit</s:String><s:String x:Key="DPSlippingTeethAlarmLang">Slipping Teeth Alarm</s:String><s:String x:Key="StatelessLang">Stateless</s:String><s:String x:Key="SpeedRunLang">Speed JOG</s:String><s:String x:Key="NumLang">Number:</s:String><s:String x:Key="ScopeOpenSLang">Waveform file imported successfully.</s:String><s:String x:Key="AllAlarmLang">Whole</s:String><s:String x:Key="OperatorManualLang">Operation Manual</s:String><s:String x:Key="MPAServoEnableWarnLang">Servo enable conflict, this function cannot be executed</s:String><s:String x:Key="PositionReachTip1Lang">Position reached.</s:String><s:String x:Key="WarningTitleLang">Warning</s:String><s:String x:Key="ExternalBrakeResistorValueLangZ">External brake resistor value(P00-32)</s:String><s:String x:Key="NoSaveLang">No save</s:String><s:String x:Key="MoveDownLang">Move down</s:String><s:String x:Key="ElectronicGearRatioNumeratorLangZ_Line">Electronic gear numerator(P03-10)</s:String><s:String x:Key="BusStepperTypeLang">Bus</s:String><s:String x:Key="PositiveInternalTorqueLimitLangZ_Line">Positive internal torque limit(P05-10)</s:String><s:String x:Key="Machine525">General servo-M23B-R/RC Bus</s:String><s:String x:Key="Param2Lang">Parameter file 2：</s:String><s:String x:Key="LanguageEnLang">Please select language environment:</s:String><s:String x:Key="EncoderClearLang">Absolute Encoder Multi-Loop Zeroing</s:String><s:String x:Key="ParamCheckedLang">You have checked the following parameters.Do you download all of the following paraeters?</s:String><s:String x:Key="DI0C">0x0C(12): Reserved</s:String><s:String x:Key="Speed_TorqueSettingLangZ">Speed/Torque mode parameter setting</s:String><s:String x:Key="TorquePercentToFinalTurnLang">Finish angle:</s:String><s:String x:Key="NoDimensionLang">Dimensionless</s:String><s:String x:Key="FSUseP01-20LangZ">0: Use P01-20.nnnX setting</s:String><s:String x:Key="DI0E">0x0E(14): Multi-Speed Selection 2</s:String><s:String x:Key="ZeroAuthorityLang">0 level authority</s:String><s:String x:Key="BuiltInBrakeResistanceValueLangZ">Built-in brake resistor value(P00-34)</s:String><s:String x:Key="InertiaRatioAfterLang">Estimated moment of inertia ratio</s:String><s:String x:Key="RestoreParam2Lang">Restore level 2 permission parameters</s:String><s:String x:Key="PowerOnReadyLang">Power-On</s:String><s:String x:Key="SaveAsLang">Save as</s:String><s:String x:Key="ParaItemWarnLang">The parameter already exists.</s:String><s:String x:Key="StepperTypeLang">Stepper</s:String><s:String x:Key="ControlModeLangZ_Line">Control Mode(P01-01)</s:String><s:String x:Key="UpFailedLang">Update fafiled</s:String><s:String x:Key="AlarmCodeLang">Fault code</s:String><s:String x:Key="WriteParaSuccLang">Parameters written successfully.</s:String><s:String x:Key="PSTMoveDistanceLang">Move</s:String><s:String x:Key="CH3FFTAnalysisLang">CH3 FFT Analysis</s:String><s:String x:Key="AddItemLang">Add</s:String><s:String x:Key="SpeedAnalogCommandSelectionLangZ">Speed analog command select(P06-05.0)</s:String><s:String x:Key="AxisLang">Axis</s:String><s:String x:Key="SaveAsCustomGroupLang">Save as custom group</s:String><s:String x:Key="InstructionPulseLevelNegationLangZ">Invert the effective level command pulses(P03-03.1)</s:String><s:String x:Key="PositionReachLang">Position reached</s:String><s:String x:Key="FloatDataReLang">Can be dragged to any position.</s:String><s:String x:Key="MPATestModeType1Lang">Horizontal Machine Properties Analysis</s:String><s:String x:Key="LanguageSetLang">Language Settings</s:String><s:String x:Key="DOutputLangZ">DO output setting</s:String><s:String x:Key="PSTFinishReLang">Parameter Self-tuning Finish</s:String><s:String x:Key="PSTWithoutPositionCommandLang">Without Position Command</s:String><s:String x:Key="CurrentPageLang">(Current Page)</s:String><s:String x:Key="FloatDataLang">Floating data display box</s:String><s:String x:Key="CommNameFailedLang">Serial port number failed to obtain.Please check the serial port configuration of your computer.</s:String><s:String x:Key="DimensionWarnLang">Dimension setting is wrong.Please set correctly.</s:String><s:String x:Key="Goal1Lang">Goal 1</s:String><s:String x:Key="MPARotateOverLimitWarnLang">Allowed number of rotations is out of range, please retype and try again</s:String><s:String x:Key="Machine512">General servo</s:String><s:String x:Key="SpeedControlLangZ">1：Speed ControlMode</s:String><s:String x:Key="LeftJOGStopLang">Left JOG is stop.</s:String><s:String x:Key="DO06">0x06(6)：速度到达检出</s:String><s:String x:Key="ReachGoal1Lang">Reach goal 1</s:String><s:String x:Key="DigitalTorqueSettingValueLangZ_Line">Digital torque set value(P05-03)</s:String><s:String x:Key="RepeatWaitTimeLang">Repeat waiting time</s:String><s:String x:Key="DPOverloadLang">Overload</s:String><s:String x:Key="MPANotchFilterWindowTitleLang">Set Notch Filter</s:String><s:String x:Key="ProductSelectLang">Product selection</s:String><s:String x:Key="AttitudeControlLangZ">0：Position ControlMode</s:String><s:String x:Key="BackViewLang">Return to previous screen</s:String><s:String x:Key="HelpLang">Help</s:String><s:String x:Key="InitLanguageLang">Initialization Language</s:String><s:String x:Key="SamPeriodLang">Sampling Period</s:String><s:String x:Key="UserSetLang">User configuration</s:String><s:String x:Key="PSTStopReLang">Adjustment interrupted, please power cycle or perform a software reset</s:String><s:String x:Key="StartConnectLang">Start Connection</s:String><s:String x:Key="AllParaLang">All Parameters</s:String><s:String x:Key="IOChnSelectWarnLang">A maximum of four I/O channels can be selected.</s:String><s:String x:Key="SaveAsAllParasLang">Save for all parameters</s:String><s:String x:Key="PCSetLang">PC setting</s:String><s:String x:Key="NoWarnLang">No warn</s:String><s:String x:Key="HardwareVersionLang">Hardware:</s:String><s:String x:Key="CustomGroupNameWarnLang">The parameter group cannot be empty.
 Parameter group names cannot begin with a number.
The custom parameter list cannot be empty.</s:String><s:String x:Key="StartConstrastLang">Start the Comparison</s:String><s:String x:Key="MPAMagnitudeLang">Magnitude (dB)</s:String><s:String x:Key="LockOneScrewCountLang">Total number of locking screws:</s:String><s:String x:Key="NumberOfTurnsLang">Number of locking coils of electric screwdriver(r):</s:String><s:String x:Key="SystemSetWarnLang">Please close the communication and set up the system again.</s:String><s:String x:Key="TorqueCommandSelectionLangZ_Line">Torque command source(P05-00)</s:String><s:String x:Key="SetpointOfP04-02LangZ">1: P04-02 setting value</s:String><s:String x:Key="PosRunLang">Position JOG</s:String><s:String x:Key="DigitalTorqueSettingValueUnitAndRangeLangZ_Line">(Unit：1% ____ Range：-300-300)</s:String><s:String x:Key="AuthorityWarnLang">This parameter cannot be modifield.Please upgrade permissions.</s:String><s:String x:Key="NF1Lang">Notch Filter 1</s:String><s:String x:Key="NoSelectParamLang">No parameters are checked</s:String><s:String x:Key="AutoStartFailedLang">The Serial port number and slave address cannot be null.</s:String><s:String x:Key="ControlTypeLang">Control Type</s:String><s:String x:Key="AddMachineLang">Add New Product</s:String><s:String x:Key="ControlModeLangZ">ControlMode(P01-01.0)</s:String><s:String x:Key="EditableLang">Editable</s:String><s:String x:Key="FileErrorWarnLang">Warning configuration file error ,please check the configuration file.</s:String><s:String x:Key="ForwardSpeedLimitUnitAndRangeLangZ_Line">(Unit：mm/s ____ Range：0-6000)</s:String><s:String x:Key="OperatingLang">In operation...</s:String><s:String x:Key="ConnectionOkLang">Commmunication successful.</s:String><s:String x:Key="DI19">0x19(25): External Alarm Signal</s:String><s:String x:Key="NewTableLang">New Table</s:String><s:String x:Key="SpeedCommandDigitalSetPointLangZ_Line">Speed command digital set value(P04-02)</s:String><s:String x:Key="EncoderLang">Encoder</s:String><s:String x:Key="NoImportLang">non-import</s:String><s:String x:Key="Step3TipLang">Start:click "Start" button and input signal to the DI port set according to "Step 1" to make the motor operate.
Stop:click "Stop" button to immediately stop the movement.</s:String><s:String x:Key="PSTCancelLang">Won't save the adjustment result, are you sure?</s:String><s:String x:Key="AskSaveParamLang">Do you want to save all parameters?</s:String><s:String x:Key="MonitorValueLang">Monitor Value</s:String><s:String x:Key="OPENLangZ">Open</s:String><s:String x:Key="ReMotionLang">Relative motion</s:String><s:String x:Key="ContrastFailedWarnLang">The parameter comparison failed.</s:String><s:String x:Key="ForwardLang">Forward</s:String><s:String x:Key="ParamFilePathParamLang">Parameter file address:</s:String><s:String x:Key="ConPointModeLang">Continous Single Point Mode</s:String><s:String x:Key="SamShowLang">Sampling point display</s:String><s:String x:Key="FPGAFirmwareLang">FPGA Firmware:</s:String><s:String x:Key="Step1TipLang">JOG start signal has two ways:use DI input and enable, start signal integration.
1.Uncheck:start signal and enable signal are integrated.
2.Check:select a DI port as the start signal of internal position, and then power on again to make the parameter take effect.
1.In case of alarm AL.102,please go to "Parameter Setting"-&gt;"P06_IO_parameter" table to check whether DI1-DI8 has DI port repeatedly set,modify and power on again.
2.If DI port has been set and needs to be modified,please modify it in "Parameter Setting"-&gt;"P06_IO_parameter".</s:String><s:String x:Key="PSTSetResultLang">Self-tuning Result</s:String><s:String x:Key="AnalogQuantity1ComLang">Analog Input 1 Automatic Zero Drift Calibration (VCMD)</s:String><s:String x:Key="ChangeAuthorityLang">Modifying permissions</s:String><s:String x:Key="MPAOpenDataLang">Open</s:String><s:String x:Key="MPATestModeType3Lang">Speed Close Loop</s:String><s:String x:Key="ReminderTitleLang">Reminder</s:String><s:String x:Key="TriCondi1Lang">Rising edge</s:String><s:String x:Key="ProductAddSaveLang">Do you want to add this product?</s:String><s:String x:Key="MPASaveDataLang">Save</s:String><s:String x:Key="FSUseP01-21LangZ">1: Use P01-21 setting torque stop motor, then use P01-20.nnnX setting</s:String><s:String x:Key="SoftwareVersionLang">Software version</s:String><s:String x:Key="IsOnTriggerLang">Single trigger/capture</s:String><s:String x:Key="UnitLangZ">Unit</s:String><s:String x:Key="ScrewMissionNumLang">Electric Screwdriver Task Number:</s:String><s:String x:Key="ARMVersionLang">ARM:</s:String><s:String x:Key="ElectronicGearRatioSettingLangZ">Electronic gear ratio setting</s:String><s:String x:Key="ManualSettingLangZ">手动设置</s:String><s:String x:Key="ValidAtHighLevelLangZ">1: Active High(Optocoupler turn on)</s:String><s:String x:Key="BasicFileConfigLang">Basic Configruation File</s:String><s:String x:Key="XmlVersionLang">XML Version</s:String><s:String x:Key="Position_TorqueSettingLangZ">Position/Torque mode parameter setting</s:String><s:String x:Key="PSTStructionSelectItem2ReLang">Suitable for adjusting mechanisms with high mechanical rigidity such as ball screws or linear motors. If none of the previous options are suitable, please select this type.</s:String><s:String x:Key="OTUseP01-22FreeLangZ">4: Use P01-22 setting to stop motor, then enter free run state</s:String><s:String x:Key="VersionSelectTitleLang">Integrated servo version selection</s:String><s:String x:Key="ProductName2Lang">Product Name</s:String><s:String x:Key="RotateDirectionTitleLangZ">&lt; Rotate Way And Output &gt;</s:String><s:String x:Key="MPASetNullWarnLang">There is a null value in the current amplitude or allowed number of rotations. Please fill it and try again</s:String><s:String x:Key="AllowRotateLang">Allow Rotate</s:String><s:String x:Key="RefreshDataLang">The parameter table has been modified.Please select the save mode.</s:String><s:String x:Key="VersionLang">Version:</s:String><s:String x:Key="PSTFilterLang">Notch filter</s:String><s:String x:Key="ContrastParamOKLang">Paramter comparison completed.</s:String><s:String x:Key="QuicklyConLang">Fast reconnection</s:String><s:String x:Key="ImportParamPathLang">The current import parameter address:</s:String><s:String x:Key="CheckBitsLang">Check Bit</s:String><s:String x:Key="ScreenShotLang">Screen shot</s:String><s:String x:Key="DPOvervoltageAlarmLang">Overvoltage Alarm</s:String><s:String x:Key="FFTOperatorWarnLang">Precautions for FFT analysis：
1.No-load test run shall be carried out before equipment installation to avoid accidents.
2.There is no potiontial safety hazard in the operating environment and the machine can be stopped at any time.
3.Relevant parameters of the drive are set properly.</s:String><s:String x:Key="Assignment3Lang">Task 3</s:String><s:String x:Key="LanguageLang2">Language</s:String><s:String x:Key="CustomParaWarnLang2">The parameter group name already exists.</s:String><s:String x:Key="RotateAndOutputBtnLangZ">RotateWay
Output</s:String><s:String x:Key="OpenLang">Open</s:String><s:String x:Key="Assignment6Lang">Task 6</s:String><s:String x:Key="FFTAnalysisLang">FFT Analysis</s:String><s:String x:Key="OnlineLang">Online</s:String><s:String x:Key="TorqueControlTitleLangZ">&lt; Torque Mode &gt;</s:String><s:String x:Key="InitFileErrorLang">Software configuration file error,please restart or reinstall the software.</s:String><s:String x:Key="StandardServoLang">Standard</s:String><s:String x:Key="ParamOpenWarnLang">Parameter settings is already open.</s:String><s:String x:Key="ProdoctSeriesLang">Product Series</s:String><s:String x:Key="Firmware2Lang">Firmware 2:</s:String><s:String x:Key="MPAHorizontalReLang">《Machine Properties Analysis》 Precautions：

1、In horizontal axis mechanical charateristic mode, please ensure that the mechanical structure will not move when the motor is not exerting force;
        
2、Please execute this function only when you can immediately cut off the power supply to the servo drive;
        
3、During the execution of this function, the motor speed will change drastically. Please ensure that the equipment will not be damaged as a result;
        
4、For ordinary machinery, in the mechanical characteristic analysis results, the frequency corresponding to the peak in the amplitude graph is the resonance frequency, and the frequency corresponding to the valley is the anti-resonance frequency;</s:String><s:String x:Key="DI02">0x02(2): Alarm Clear</s:String><s:String x:Key="DO05">0x05(5)：位置接近</s:String><s:String x:Key="ImportXamlWarnLang">Please select the correct language file!</s:String><s:String x:Key="MotorInstallationGuideReLang">Explanation:
Motor installation guide provides setting for many basic parameters, which can help you quickly configure the functions of the driver.
    
Motor installation guide steps:
    
First: After confirming that the environment has no abnormalities, click the start button to enter the configuration interface.
    
Second: Control Mode Select
Different control modes correspond to different parameter settings. After selecting the desired control mode, click the next button.
    
Third: Parameter Setting for Corresponding Control Mode
Based on the control mode selected in the previous step, modify the corresponding parameters as needed. After making the changes, click the next button.
    
Fourth: Rotation Direction and Frequency Division Output Setting
Setting the rotation direction and parameters related to frequency division pulse output. After completing the settings, click the next button.
    
Fifth: Power On Valid DI Function
In this interface, the DI functions selected will be forced to an effective state by the software upon power-up. The selected functions will no longer be affected by the DI interface. After setting, click the next button.
    
Sixth: DI and DO Signal Setting
Set the functions and trigger conditions of the DI port, and the functions and open/close status of the DO port. After completing the settings, click the next button.
    
Seventh: Shutdown Mode Setting
Set the methods triggered by GR.1 class alarms, GR.2 class alarms, overtravel, and forced stop. After completing the settings, click the next button.
    
Eighth: Brake Resistor Setting
Set whether to use a regenerative resistor, choose between using an internal or external resistor, and set the corresponding resistance value and power of the regenerative resistor. After completing the settings, click the next button.
    
Ninth: All Parameters
This interface allows you to check all the parameters you have set. You can verify them one by one. After confirming they are correct, click the write button. Once the bottom of the interface indicates that writing is complete, the installation wizard parameter setting is finished.</s:String><s:String x:Key="HisAlarmNumLang">Historical alarm number:</s:String><s:String x:Key="AboutLang">About</s:String><s:String x:Key="DI1A">0x1A(26): Emergency Stop Input Signal</s:String><s:String x:Key="Step2Lang">Step 2</s:String><s:String x:Key="TurnLang">Turn</s:String><s:String x:Key="ClearHisAlarmLang">Clear historical Alarm</s:String><s:String x:Key="UseExternalRegenerativeResistorLangZ">2: Use external regenerative resistor</s:String><s:String x:Key="AlarmLimiteLang">Alarm limit</s:String><s:String x:Key="DI16">0x16(22): Home Return Start Signal</s:String><s:String x:Key="NGLang">NG</s:String><s:String x:Key="RisingEdgeCountingLangZ">0: Rising edge counting</s:String><s:String x:Key="QuestionOpLang">Do you want to perform the following operation?</s:String><s:String x:Key="SelsectDeleteProLang">Please select the version you want to remove:</s:String><s:String x:Key="TorqueCommandAnlogReversalLangZ_Line">Torque command analog quantity inversion(P05-01)</s:String><s:String x:Key="MPATestConditionLang">Test Condition</s:String><s:String x:Key="MotorOverload1TipLang">The motor is not overloaded.</s:String><s:String x:Key="StopMonitorWarnLang">The oscilloscope is beign monitored.Do you stop monitoring?</s:String><s:String x:Key="SystemFileHandlerLang">System Paramter Files</s:String><s:String x:Key="FileExistLang">The file already exists.Do you overwrite this file?</s:String><s:String x:Key="NumberLang">Num</s:String><s:String x:Key="InternalPosOK2Lang">Repeated setting of DI port,please go to "Parameter Setting" page for modification.</s:String><s:String x:Key="zh-TWLang">繁體中文</s:String><s:String x:Key="SelectCompareFileLang">Please select the axial parameters that need to be compared.</s:String><s:String x:Key="ImportInitFileLang">Import the Initialization File</s:String><s:String x:Key="BeforesStepLang">Back</s:String><s:String x:Key="MPAIsWorkingWarningWarnLang">Servo alarm occurred, machine properties analysis aborted.</s:String><s:String x:Key="SaveParamModelLang">Please select the product family of the paramter file.</s:String><s:String x:Key="PSTIfRejectionLang">If Rejection</s:String><s:String x:Key="Machine520">Open-loop</s:String><s:String x:Key="StartOperatorLang">Start operation</s:String><s:String x:Key="ScreenFailedLang">Waveform screenshot to failed.</s:String><s:String x:Key="DPIncompleteLang">Incomplete</s:String><s:String x:Key="Machine516">Multiply Axis Servo、P28</s:String><s:String x:Key="Machine526">Bus</s:String><s:String x:Key="TriPointNumLang">1.Trigger points:</s:String><s:String x:Key="FloatingHighSignalLang">Floating high signal</s:String><s:String x:Key="DO02">0x02(2)：抱闸输出</s:String><s:String x:Key="InstructionPulseNegationLangZ">Instruction pulse negation(P03-03.0)</s:String><s:String x:Key="absoluteMotorPerCirclePulseOutputCountLangZ_Line">Absolute motor per circle pulse output count(P03-25)</s:String><s:String x:Key="ConnectLang">Connect</s:String><s:String x:Key="DPOvercurrentAlarmLang">Overcurrent Alarm</s:String><s:String x:Key="CH4FFTAnalysisLang">CH4 FFT Analysis</s:String><s:String x:Key="DO08">0x08(8)：力矩限制中</s:String><s:String x:Key="IsSelectEditLang">Do you want to set deop-down options?</s:String><s:String x:Key="DataLang">Data</s:String><s:String x:Key="SoftNameLang">Soft Name:</s:String><s:String x:Key="LeftRelativeRunLang">Left in realtive motion...</s:String><s:String x:Key="MPAConnectWarnLang">Communication error, mechanical characteristic analysis aborted.</s:String><s:String x:Key="DoublePulseCommand0LangZ">2: Double pulse command(CW+CCW)</s:String><s:String x:Key="AddProductFailedLang">Product add failed!Please modify the product content.</s:String><s:String x:Key="BrakingResistanceSettingLangZ">Braking resistance setting (P00-30)</s:String><s:String x:Key="CurrentMachineLang">Current driver</s:String><s:String x:Key="StepperEnableLang">Stepper Offline</s:String><s:String x:Key="RestoreParam1Lang">Restore level 1 permission parameters</s:String><s:String x:Key="ProductNameLang">Product Name:</s:String><s:String x:Key="NextStepLang">Next step</s:String><s:String x:Key="DOForcedEnableLang">Forced DO output</s:String><s:String x:Key="GeneralMonitorLang">General Monitor</s:String><s:String x:Key="OpenWinWarnLang">The program has been corrupted.Please download the software again.</s:String><s:String x:Key="FPGAVersionLang">FPGA:</s:String><s:String x:Key="Assignment4Lang">Task 4</s:String><s:String x:Key="ReverseSpeedLimitUnitAndRangeLangZ_Rotate">(Unit：rpm ____ Range：-6000-0)</s:String><s:String x:Key="RotateDirectionLangZ">Rotate way select(P01-00.0)</s:String><s:String x:Key="ParamRunWarnLang">Updating paramters.Please try again later.</s:String><s:String x:Key="WaveFormScerenLang">Waveform Scrrenshot</s:String><s:String x:Key="CheckedParamDownOkLang">The selected parameters are downloaded successfully</s:String><s:String x:Key="MPAVerticalReLang">《Machine Properties Analysis》 Precautions：

1、Please ensure that the set gain is stable before performing the vertical axis machine properties analysis. Excessive gain will cause vibration;
    
2、In vertical axis mode, the servo loop gain, notch filter, and torque command filter constant will take effect, making its characteristics different from horizontal axis;
    
3、Please execute this function only when you can immediately cut off the power supply to the servo drive;
    
4、During the execution of this function, the motor speed will change drastically. Please ensure that the equipment will not be damaged as a result;
    
5、For ordinary machinery, in the mechanical characteristic analysis results, the frequency corresponding to the peak in the amplitude graph is the resonance frequency, and the frequency corresponding to the valley is the anti-resonance frequency;</s:String><s:String x:Key="ProdoctSeries2Lang">Product Series:</s:String><s:String x:Key="MultiParamSelectDownLang">Please select the axis parameters that need to be downloaded to the drive EPROM:</s:String><s:String x:Key="OneTriggerLang">Single Trigger</s:String><s:String x:Key="DeafultParaLang">current default</s:String><s:String x:Key="DeleteQuickMonLang">Remove from Quick Monitor</s:String><s:String x:Key="PSTModeSelectItem3ReLang">Make adjustments to prevent overshoot, in addition to gain, auto-tune parameters such as notch filters, intermediate frequency suppression, etc.</s:String><s:String x:Key="MutiSeroSelectWarnLang">Wrong product series slection,please re-select the product and connect.</s:String><s:String x:Key="DO0E">0x0E(14)：正向超程中</s:String><s:String x:Key="OTUseP01-22LockLangZ">3: Use P01-22 setting to stop motor, then servo lock</s:String><s:String x:Key="BatchDownParamLang">Batch download all parameters</s:String><s:String x:Key="MutiAxisTestRunExplainLang">Explain:In order to avoid violating any damage to the server drive or mechanism, remove all loads from the servo motor before running. After the air test is normal, the load of the servo motor can be connected for the next test.     
1.Procedures for Speed Point Trial Operation
(1)Select the axis that needs JOG and click the button.
(2)Configuration parameters "Speed command (rpm)" and "Acceleration (ms/1000rpm)", click the "button".
(3)Pressing the left mouse button for a long time "left click" or "right click" can make the motor rotate forward and backward according to the set speed. Release the mouse to stop running.

2.Operating steps of position-driven commissioning (the first and speed-driven operation must be completed before the operation can be carried out)
(1)Reverse end point and forward end point can be set. After the speed point test is finished, click the button to enter the position and start the test run.
(2)Configuration parameters "Speed instruction (rpm)", "Acceleration and deceleration (ms/1000rpm)", "Stop time" and "Number of times", click the "button".
(3)Use the left and right clicks to move the position. Click the button to pause the movement.</s:String><s:String x:Key="FiesrtAuthorityLang">1 level authority</s:String><s:String x:Key="InertiaedLang">Inertia identification completed.</s:String><s:String x:Key="RegenerativeBrakeTip1Lang">In regenerative braking state.</s:String><s:String x:Key="ImportPathLang">The import path:</s:String><s:String x:Key="PosFeedBackLang">Position feedback</s:String><s:String x:Key="MPATestModeType2Lang">Vertical Machine Properties Analysis</s:String><s:String x:Key="ConTriLang">Conditional trigger</s:String><s:String x:Key="stationAddrErrorLang">Slave address is wrong,please reset(address range:0-254).</s:String><s:String x:Key="SoftwareResetLang">Software reset</s:String><s:String x:Key="DI01">0x01(1): Servo Enable</s:String><s:String x:Key="CloseLang">Close</s:String><s:String x:Key="ProductDeleteSuccLang">Product delelted successfully,need to restart the software.Do you want to restart the software?</s:String><s:String x:Key="ServoStartLang">Turn on Enablement</s:String><s:String x:Key="ParamFileLang">Parameter File</s:String><s:String x:Key="CompleteSignalLang">Complete signal</s:String><s:String x:Key="PositionSpeedModeSettingBtnLangZ">Position
Speed Mode</s:String><s:String x:Key="TestRunLang">Test Run</s:String><s:String x:Key="ParameterFunctionNameLangZ">Parameter name</s:String><s:String x:Key="DragLang">Drag</s:String><s:String x:Key="UseBuiltInRegenerativeResistorLangZ">1: Use built-in regenerative resistor</s:String><s:String x:Key="BasicMonitorLang">System Monitor</s:String><s:String x:Key="SamTimeLang">Samping Time</s:String><s:String x:Key="DI0B">0x0B(11): Pulse Command Input Disable</s:String><s:String x:Key="ContrastParamLang">Parameter Comparison</s:String><s:String x:Key="RestoreAllParamLang">Restore all parameters</s:String><s:String x:Key="TorqueLimitationTip1Lang">Motor torque limit.</s:String><s:String x:Key="AutoModeLang">Automatic Mode</s:String><s:String x:Key="DO0C">0x0C(12)：预留</s:String><s:String x:Key="BurnWriteLang">Burn to memory</s:String><s:String x:Key="SelectFileLang">Select the file</s:String><s:String x:Key="SetAreaLang">Wizard configuration area</s:String><s:String x:Key="DPProlongedPressureAlarmLang">Prolonged Pressure Alarm</s:String><s:String x:Key="Channel4Lang">Channel 5</s:String><s:String x:Key="AssignmentLang">Assignment</s:String><s:String x:Key="RangeLang">Range:</s:String><s:String x:Key="CurrentSetLang">Cureent settings</s:String><s:String x:Key="NoEditableLang">Non editing</s:String><s:String x:Key="SoftResetWarnLang">Is softwart reset performed?</s:String><s:String x:Key="ResetLang">Reset</s:String><s:String x:Key="StopSetWarnLang">Parameter needs to stop to modify.</s:String><s:String x:Key="AssistFunctionLang">Auxiliary Function</s:String><s:String x:Key="XmlToExcelLang">XML file to Excel file</s:String><s:String x:Key="QuickStopLang">Emergency stop</s:String><s:String x:Key="DOSettingLang">DO ports set</s:String><s:String x:Key="PSTNotMeasureInertiaLang">Not measure</s:String><s:String x:Key="ValidAtLowLevelLangZ">0: Active Low(Optocoupler turn off)</s:String><s:String x:Key="WriteLang">Write in</s:String><s:String x:Key="TorqueCommandAnlogReversalLangZ">Torque command analog quantity inversion(P05-01)</s:String><s:String x:Key="DownloadLang">Download</s:String><s:String x:Key="IsDIPortLang">DI input selected as internal position start signal?</s:String><s:String x:Key="TriCondi2Lang">Down edge</s:String><s:String x:Key="PSTReLang">《Parameter Self-tuning》 Precautions：
        1. Please preform the operation where an emergency stop(power OFF) is possible.
        During adjustment, the response can change significantly, so be sure to perform it in a state where an emergency stop(power OFF) is possible.
    2. Ensure safety near the operating parts.
        Thoroughly confirm that there is no danger in the movement range and direction when the motor operates before execution.
        Additionally, for safety reasons, set ptotective operations such as overtravel limits.
    3. Check for any position deviation before operation.
        Before running, be sure to perform a homing reset to return to a safe position.
        Operating with a position offset can lead to runaway situations, which are extremely dangerous.
    4. Confirm system safety when used in a vertical axis state.
        When using this function on a vertical axis, ensure that the system will not free-fall enven when the servo is off.
        
    Explanation:
        Parameter self-tuning is a function where the servo unit operates using internal or external position commands. Duting peration, it automatically adjusts parameters according to mechanical characteristic, including servo rotational inertia ratio(only without position commands), speed loop gain, position loop gain, torque command filter, notch filter, friction compensation, Type-A anti-vibration control, and vibration suppression(only when mode selection is set 2 or 3).
        
    Steps to use the parameter self-tuning function:
        1. After confirming the precautions, click "Start" to enter the auto-tuning interface.
        
        2. Select parameter self-tuning with or without position commands as needed. If with position commands, servo enable must be active, you need a host device(motion control card or PLC, etc.) to input position commands to run the motor before using this function.
        
        3. For parameter self-tuning without position commands, set the mode, mechanism, movement distance, and whether to measure the rotational inertia ratio. Click "Next", enable the servo, and then click "Start". Wait for the adjustment to complete, then click "Finish" to save the parameters after auto-tuning.
        
        4. For parameter self-tuning with position commands, set the mode, mechanism, and correct inertia ratio. Click "Next", then click "Start". After the adjustment is completed, click "Finish" to save the parameters after auto-tuning.
    </s:String><s:String x:Key="MotorOverloadLang">Overload State</s:String><s:String x:Key="onConnectionLang">Conmmunication is underway.Please stop communication and modify.</s:String><s:String x:Key="InertiaIdentifyLang">Inertia Identify</s:String><s:String x:Key="UnKnowWarnDecLang">Unknown alarm,please contact the manufacturer.</s:String><s:String x:Key="BusServoLang">Bus</s:String><s:String x:Key="BaudrateLang">Baurd Rate</s:String><s:String x:Key="PauseLang">Pause</s:String><s:String x:Key="EnableingLang">Enabled</s:String><s:String x:Key="PSTWithPositionCommandLang">With Position Command</s:String><s:String x:Key="ParamOptionSuccessLang">Drop box paramters file saved successfully.The address is as follows:</s:String><s:String x:Key="DO01">0x01(1)：伺服警报</s:String><s:String x:Key="DO11">0x11(17)：动态制动中</s:String><s:String x:Key="CHFFTLang">FFT Analysis</s:String><s:String x:Key="DI00">0x00(0): Null</s:String><s:String x:Key="PasswordErrorLang">PASSWORD ERROR! Please re-enter!</s:String><s:String x:Key="PowerSupplyTip1Lang">The power supply has been powered on.</s:String><s:String x:Key="ReversCompletionSignalLang">Reverse completion signal</s:String><s:String x:Key="FFTAnalysisReLang">Explanation:
    
Perform Fourier analysis on the system to obtain the notch frequency.

After enabling, click the start measurement button. After waiting for the measurement to complete, click the write button to complete the FFT analysis.</s:String><s:String x:Key="Gr2FailureStopMethodLangZ">Gr.2 Failure stop method(P01-20.1)</s:String><s:String x:Key="JOGWarnLang">The set value exceeds the value range.Please reset it.</s:String><s:String x:Key="EncoderErrorClearLang">Absolute Encoder Fault Clearing</s:String><s:String x:Key="NoHandlerWarnLang">no-operation</s:String><s:String x:Key="ReNameLang">Rename</s:String><s:String x:Key="ReadParaSuccLang">Parameters read successfully.</s:String><s:String x:Key="DPMaximumAlarmLang">Upper Limit</s:String><s:String x:Key="DI1E">0x1E(30): Position Command Inversion Signal</s:String><s:String x:Key="ProductAddSuccLang">Product added successfully,need to restart the software.Do you want to restart the software?</s:String><s:String x:Key="InternalPosLang">Internal position start signal input port</s:String><s:String x:Key="ProductModelLang">Product Mode</s:String><s:String x:Key="SuperAuthorityLang">Super authority</s:String><s:String x:Key="SelectItemLang">Option</s:String><s:String x:Key="ImportTipsLang">The axis of the current import file:</s:String><s:String x:Key="MPATestModeType4Lang">Speed Open Loop</s:String><s:String x:Key="StartNOLang">Startup failed!</s:String><s:String x:Key="Machine514">BLDC</s:String><s:String x:Key="Machine524">Non-backpack servo electric screwdriver</s:String><s:String x:Key="MachinePropertiesAnalysisLang">Machine Properties Analysis</s:String><s:String x:Key="ContrastWarnLang">The parameter table doese not match the machine model of the current parameter table.</s:String><s:String x:Key="InstructionPulseFilterLangZ_Line">Position pulse filter(P03-04)</s:String><s:String x:Key="BiasLang">Bias</s:String><s:String x:Key="CompareFileConstrastLang">Compare with external files</s:String><s:String x:Key="Assignment9Lang">Task 9</s:String><s:String x:Key="importAlarmNumLang">Import</s:String><s:String x:Key="JOGSpeedMaxWarnLang">The jog velocity is too large, the collision is the risk!
Click "confirm the problem and set the speed to 30mm/s."</s:String><s:String x:Key="NoMonitorLang">No monitoring</s:String><s:String x:Key="AuthorityChangeOKLang">Driver permission changed successfully!
 Current Permission:</s:String><s:String x:Key="CanelLang">Canel</s:String><s:String x:Key="SerialPortSetLang">Communication Settings</s:String><s:String x:Key="UploadAllLang">Read All Parameters</s:String><s:String x:Key="SinMotionLang">Single motion</s:String><s:String x:Key="ReversalDPStopLang">Stop Reversal</s:String><s:String x:Key="SaveAsParamLang">Save as parameter</s:String><s:String x:Key="DownloadWarnLang">Do you want to download all setting values to the EPROM of the drive?</s:String><s:String x:Key="DI0A">0x0A(10): Zero Lock</s:String><s:String x:Key="DigitalTorqueSettingValueUnitAndRangeLangZ">(Unit：1% ____ Range：-300-300)</s:String><s:String x:Key="CloseLangZ">Close</s:String><s:String x:Key="TorqueLang">Torque Mode</s:String><s:String x:Key="OutputTestLang">Output port test</s:String><s:String x:Key="ReversalDPStartLang">Start Reversal</s:String><s:String x:Key="InertiaingLang">Inertia in recognition. Please keep click "Turn" button</s:String><s:String x:Key="AntiExternalTorqueLimitUnitAndRangeLangZ">(Unit: % ____ Range: -350-0)</s:String><s:String x:Key="ColstContrastLang">Close parameter comparison</s:String><s:String x:Key="DI11">0x11(17): Multi-Torque Selection 1</s:String><s:String x:Key="TimeLang">Time</s:String><s:String x:Key="PulsePortInputLangZ">0: Pulse input on this axis</s:String><s:String x:Key="DriveWarningLang">Drive Warning</s:String><s:String x:Key="PSTModeSelectItem3Lang">3: Position mode that emphasizes overshoot</s:String><s:String x:Key="ScopeMonitorFailedLang">Oscilloscope sampling failed.</s:String><s:String x:Key="TorqueControlSpeedLimitUnitAndRangeLangZ_Line">(Unit：mm/s ____ Range：0-6000)</s:String><s:String x:Key="MPAWaveFormFileLang">Machine Properties Analysis WaveForm File</s:String><s:String x:Key="PSTServoEnableReLang">Servo is Enabled， wait to Start</s:String><s:String x:Key="RunLang">Run</s:String><s:String x:Key="FixedLang">Waveform adaptive screen</s:String><s:String x:Key="MonSolveLang">Disposal Measures</s:String><s:String x:Key="PositionTorqueModeSettingBtnLangZ">Position
Torque Mode</s:String><s:String x:Key="UserTitleLang">Fast working area</s:String><s:String x:Key="PositiveInternalTorqueLimitRangeLangZ_Line">(Range：0-300)</s:String><s:String x:Key="TriCondi4Lang">Above Horizontal</s:String><s:String x:Key="CH2FFTAnalysisLang">CH2 FFT Analysis</s:String><s:String x:Key="CurrentAlarmLang">Current alarm</s:String><s:String x:Key="DownAllParamLang">Download all parameters</s:String><s:String x:Key="ImportFileDesLang">Init File Import Instruction:</s:String><s:String x:Key="DO00">0x00(0)：无</s:String><s:String x:Key="ParaGroupNameLang">Parameter Group Name:</s:String><s:String x:Key="SpeedTorqueControlTitleLangZ">&lt; Speed/Torque Mode &gt;</s:String><s:String x:Key="MotorPosLang">Motor position</s:String><s:String x:Key="NotUseRegenerativeResistorLangZ">0: Not using regenerative resistor</s:String><s:String x:Key="ValueErrorLang">Please enter the correct value.
Trigger level:decimal(reserve two decimal places).
Pretrigger Percentage:non-negative decimal(reserve one decimal place)</s:String><s:String x:Key="ScreenSuccessLang">Screenshot of waveform is successful!The address is as follows:</s:String><s:String x:Key="SaveParaWarnLang">Failed to save file.</s:String><s:String x:Key="TorqueCommandSelectionLangZ">Torque command setting(P05-00)</s:String><s:String x:Key="ScreenShotToCLang">Screenshot(Copy to the clipboard)</s:String><s:String x:Key="CH1FFTAnalysisLang">CH1 FFT Analysis</s:String><s:String x:Key="IsStartMIGLang">Is it starting MotorInstallationGuide ?</s:String><s:String x:Key="RestoreFactoryLang">Restore factory paramters</s:String><s:String x:Key="ExeNameLang">Online program update</s:String><s:String x:Key="ServoTypeLang">Servo</s:String><s:String x:Key="LanguageCode">en-US</s:String><s:String x:Key="MPAStartMeasureLang">Start Measure</s:String><s:String x:Key="ImportSuccessWarnLang">Language file imported successfully,need to restart the software.Do you want to restart the software?</s:String><s:String x:Key="GoBackLangZ">GoBack</s:String><s:String x:Key="ChannelLang">Channel</s:String><s:String x:Key="ContrastAxisLang">Contrast axis</s:String><s:String x:Key="AddLanguageLang">Add language</s:String><s:String x:Key="DividedFrequencyOutputPusesNumber">Pulse count in frequency divider output(P03-25)</s:String><s:String x:Key="ImportFileLang">Import File</s:String><s:String x:Key="DI07">0x07(7): Positive External Torque Limit Toggle</s:String><s:String x:Key="GainSetLang">Gain adjustment</s:String><s:String x:Key="BackZeroLang">Back to Zero</s:String><s:String x:Key="InstallParamDownOkLang">Motor configuration parameters downloaded successfully.
Power on an restart.</s:String><s:String x:Key="DI04">0x04(4): Reverse Overtravel</s:String><s:String x:Key="AntiExternalTorqueLimitLangZ_Line">Anti external torque limit(P05-11)</s:String><s:String x:Key="DO0A">0x0A(10)：伺服警告</s:String><s:String x:Key="DI12">0x12(18): Multi-Torque Selection 2</s:String><s:String x:Key="Assignment11Lang">Task 11</s:String><s:String x:Key="PositiveInternalTorqueLimitUnitAndRangeLangZ">(Unit: % ____ Range: 0-350)</s:String><s:String x:Key="MotorInstallationLang">Motion installation</s:String><s:String x:Key="ParamItemEditLang">Modify paramter sepcification or drop-down box options.</s:String><s:String x:Key="ServoStopLang">Turn off Enablement</s:String><s:String x:Key="PulseRangeLangZ">(Range: 1 - 65535)</s:String><s:String x:Key="AttitudeTorqueControlLangZ">5：Position/Torque ControlMode</s:String><s:String x:Key="OtherAlarmLang">Other Alarm</s:String><s:String x:Key="MPANotchFilterDepthLang">Notch Filter
Depth</s:String><s:String x:Key="SaveOKLang">The file was saved successfully.</s:String><s:String x:Key="DriveFailureLang">Drive Failure</s:String><s:String x:Key="UploadLang">Upload</s:String><s:String x:Key="Assignment12Lang">Task 12</s:String><s:String x:Key="NF3Lang">Notch Filter 3</s:String><s:String x:Key="Assignment2Lang">Task 2</s:String><s:String x:Key="PSTTrasmissionInertiaRatioLang">Trasmission inertia ratio</s:String><s:String x:Key="PSTFactoryModeReLang">Are you sure you want to reset the tuning parameters to factory defaults and execute?</s:String><s:String x:Key="SpeedCommandSettingLangZ">SpeedMode commmand parameter setting</s:String><s:String x:Key="TorqueControlSpeedLimitUnitAndRangeLangZ_Rotate">(Unit：rpm ____ Range：0-6000)</s:String><s:String x:Key="InerStep2Lang">Step 2:Action</s:String><s:String x:Key="CurrentMachineValueLang">Current drive value</s:String><s:String x:Key="ReReadBatchParamLang">Read all parameters again and compare the parameters.</s:String><s:String x:Key="InstructionPulseFormLangZ">Instruction pulse form(P03-01.0)</s:String><s:String x:Key="CustomFailedLang">Custom parameter group creation failed.</s:String><s:String x:Key="ElectronicGearRatioDenominatorLangZ_Line">Electronic gear denominator(P03-11)</s:String><s:String x:Key="SliderLang">Slider</s:String><s:String x:Key="ReachGoal2Lang">Reach goal 2</s:String><s:String x:Key="SaveLogLang">Save Log</s:String><s:String x:Key="IncompleteSignalLang">Incomplete signal</s:String><s:String x:Key="DO12">0x12(18)：电机旋转检出</s:String><s:String x:Key="DefaultCommSetLang">Deafult Serial Port Settings</s:String><s:String x:Key="InsturctionTitleLangZ">&lt; Insturction Input Setting &gt;</s:String><s:String x:Key="ProductDeleteLang">Do you want to delete this product?</s:String><s:String x:Key="PositiveInternalTorqueLimitRangeLangZ">(Range：0-300)</s:String><s:String x:Key="PSTModeSelectItem1Lang">1: Standard mode</s:String><s:String x:Key="ProductCodeFailedLang">The product code overlaps with the existing product code.Please reset the product code.
Existing product code:</s:String><s:String x:Key="Machine521">Closed-loop</s:String><s:String x:Key="MPAScreenshotLang">Screenshot</s:String><s:String x:Key="Channel0Lang">Channel 1</s:String><s:String x:Key="InerStep1Lang">Step 1:Enable the servo</s:String><s:String x:Key="MPANotchFilterWidthLang">Notch Filter
Width</s:String><s:String x:Key="OperatedLang">The operation has been completed.</s:String><s:String x:Key="ChangeIconLang">Change icon</s:String><s:String x:Key="InertiaRatioParamSetLang">Inertia identification parameter sett</s:String><s:String x:Key="ReadAlarmLang">Read historical Alarm</s:String><s:String x:Key="NormalWayLangZ">0: Normal</s:String><s:String x:Key="TriCondi3Lang">Along trigger</s:String><s:String x:Key="SelectEditLang">Drop down box options</s:String><s:String x:Key="PSTLoadRotationalInertiaLang">Load rotational inertia measure</s:String><s:String x:Key="TorqueControlSpeedLimitSourceLangZ">Torque control speed limit source(P05-01)</s:String><s:String x:Key="AlarmTimeLang">Alarm time(/s)</s:String><s:String x:Key="DownDefaultLang">Restore factory setting</s:String><s:String x:Key="LeftSingleRunLang">Left in single motion...</s:String><s:String x:Key="MPAIsWarningWarnLang">Servo alarm occurred, this function cannot be executed</s:String><s:String x:Key="DI14">0x14(20): Gantry Alignment Reset Signal</s:String><s:String x:Key="MaxValueLang">Maxinum</s:String><s:String x:Key="CloseEnableLang">Close Enabled</s:String><s:String x:Key="SaveAllParasLang">Save All Parameters</s:String><s:String x:Key="TorqueControlSpeedLimitUnitAndRangeLangZ">(Unit: rpm ____ Range: 0-6000)</s:String><s:String x:Key="UploadParaLang">Read Parameter:</s:String><s:String x:Key="WriteCompleteLangZ">Write Completed!</s:String><s:String x:Key="PositionCommandLangZ">PositionCommand(P03-00)</s:String><s:String x:Key="AutoConnectLang">Automatic Connection</s:String><s:String x:Key="ParameterGroupLang">Parameter Groups</s:String><s:String x:Key="DeleteMachineLang">Delete Product</s:String><s:String x:Key="SaveQuickMonLang">Save quick monitoring values</s:String><s:String x:Key="ParaManageLang">Parameter Management</s:String><s:String x:Key="SoftLang">The appearance settings</s:String><s:String x:Key="AllAxisParamLang">All axial parameters</s:String><s:String x:Key="InversionLang">Inversion</s:String><s:String x:Key="ForcedTriLang">Forced trigger</s:String><s:String x:Key="PSTStructionSelectItem3Lang">3: Rigid body system</s:String><s:String x:Key="InstructionPulseFilterLangZ">Instruction pulse filter(P03-04)</s:String><s:String x:Key="DeleteItemLang">Delete</s:String><s:String x:Key="FreLang">Frequency:</s:String><s:String x:Key="SystemSetLang">System configuration</s:String><s:String x:Key="Assignment0Lang">Task 0</s:String><s:String x:Key="PSTModeSelectLang">Mode</s:String><s:String x:Key="RightSingleRunLang">Right in single motion...</s:String><s:String x:Key="NF4Lang">Notch Filter 4</s:String><s:String x:Key="CurrentComLang">Automatic zero drift compensation of current sensor</s:String><s:String x:Key="CustomTableLang">Custom Table</s:String><s:String x:Key="Channel7Lang">Channel 8</s:String><s:String x:Key="DPParameterAnomalyLang">Parameter Anomaly</s:String><s:String x:Key="TriPreLang">Pretrigger Percentage</s:String><s:String x:Key="MPA516NotchFilterWidthLang">Notch Filter
Width</s:String><s:String x:Key="BrakingResistanceSettingBtnLangZ">Braking
Resistance</s:String><s:String x:Key="WarnOrFaultLang">Warning or Failrue</s:String><s:String x:Key="Assignment10Lang">Task 10</s:String><s:String x:Key="CurrentValueLang">Current_Value</s:String><s:String x:Key="HisAlarmClearLang">Alarm record clearing</s:String><s:String x:Key="JADDTestRunLang">Test Run</s:String><s:String x:Key="PowerSupplyTip2Lang">The power supply is not powered on.</s:String><s:String x:Key="SaveDirectlyLang">Save directly</s:String><s:String x:Key="ScopeOpenFLang">Waveform file import failed.</s:String><s:String x:Key="AnotherPulsePortInputLangZ">1: Pulse input on another axis</s:String><s:String x:Key="DO07">0x07(7)：零速检出</s:String><s:String x:Key="SelectSaveAsFileLang">Please select the parameter file you want to save as files:</s:String><s:String x:Key="MPA516NotchFilterDepthLang">Notch Filter
Depth</s:String><s:String x:Key="FilterUnitAndRange">(Unit：0.1us)</s:String><s:String x:Key="ReverseSpeedLimitLangZ_Line">Reverse speed limit(P04-07)</s:String><s:String x:Key="OperatorWarnLang">1.There is no potiontial safety hazard in the operating environment and the machine can be stopped at any time. 3.Relevant parameters of the drive are set properly.</s:String><s:String x:Key="SaveAsSetValueColumnLang">Save as parameter file("Setting value" value)</s:String><s:String x:Key="PilotRunLang">Pilot Run</s:String><s:String x:Key="LeftShiftLang">Left Shift</s:String><s:String x:Key="Built-inMulti-SegmentPositionLangZ">3: Built-in multi-SegmentPosition</s:String><s:String x:Key="PositionControlTitleLangZ">&lt; Position Mode &gt;</s:String><s:String x:Key="PSTPositionCommandLang">Position Command</s:String><s:String x:Key="ToolsLang">Tools</s:String><s:String x:Key="ProductCodeLang">Product Code:</s:String><s:String x:Key="ImportLang">New Language import</s:String><s:String x:Key="OutOfRangeLang">The setting value exceeds the value range,please re-enter.</s:String><s:String x:Key="Channel2Lang">Channel 3</s:String><s:String x:Key="LangDictionaryWindowLang">Language Dictionary</s:String><s:String x:Key="AnalogQuantity2ComLang">Analog Input 2 Automatic Zero Drift Calibration (TCMD)</s:String><s:String x:Key="DriveStatusLang">Status:</s:String><s:String x:Key="SoftTitleLang">ServoStudio</s:String><s:String x:Key="ReturnLang">Return</s:String><s:String x:Key="MPAVerticalFinishQuestionLang">Vertical axis mechanical characteristic analysis completed, servo disabled?</s:String><s:String x:Key="InternalPosOKLang">Download successed,please power on immediately to make the parameters take effect.</s:String><s:String x:Key="RealTimeLogLang">Real-time communication log</s:String><s:String x:Key="ScopeTitleLang">Oscilloscope</s:String><s:String x:Key="Assignment13Lang">Task 13</s:String><s:String x:Key="MIGOperatorWarnLang">《MotorInstallationGuide》 Precautions：
1、To prevent accidental incidents, please try no load test run, before use this Function
2、Check that running environment has no issues
3、The setting of the driver-related parameters are apropriate
4、Please disable the motor enable</s:String><s:String x:Key="ImportTipLang">Import prompt</s:String><s:String x:Key="FrequencyDivisionOutptPulsePhaseSequenceInversionLangZ">Invert phase sequence of frequency divider output(P03-26.0)</s:String><s:String x:Key="OneMotorRevolutionPositionCommandsNumLangZ">Number of Instructions for motor to rotate one revolution(P03-09)</s:String><s:String x:Key="SequenceCodeLang">Sequence Code</s:String><s:String x:Key="MIGStartLang">Start</s:String><s:String x:Key="LangDeleteQuesLang">Do you want to delete this language?</s:String><s:String x:Key="ForwardDPStopLang">Stop Forward</s:String><s:String x:Key="DeleteLanguageLang">Delete language</s:String><s:String x:Key="SelectSaveFileLang">Please select the parameter file you want to save files:</s:String><s:String x:Key="PSTStructionSelectItem1Lang">1: Belt mechanism</s:String><s:String x:Key="PowerSupplyLang">Power supply</s:String><s:String x:Key="DI1B">0x1B(27): Probe 1 Input Signal</s:String><s:String x:Key="PositiveInternalTorqueLimitLangZ">Positive internal torque limit(P05-10)</s:String><s:String x:Key="G1NotUseDBLangZ">2: Not use DB, freedom stop</s:String><s:String x:Key="AnalogQuantityCommandLangZ">0: Analog command</s:String><s:String x:Key="DPEncoderAlarmLang">Encoder Alarm</s:String><s:String x:Key="ReadReminderLang">Read file instruction:</s:String><s:String x:Key="ZSignalUnitAndRangeLangZ">(Unit: 0.1ms ____ Range: 0-10000)</s:String><s:String x:Key="TorqueCommandSettingLangZ">Torque mode command parameter setting</s:String><s:String x:Key="DO04">0x04(4)：位置到达</s:String><s:String x:Key="SamingModeLang">Sampling Pattern</s:String><s:String x:Key="ContrastBatchParamLang">Compare with the import file</s:String><s:String x:Key="DI0F">0x0F(15): Multi-Speed Selection 3</s:String><s:String x:Key="OvertravelStopMethodLangZ">Over travel stop method(P01-20.2)</s:String><s:String x:Key="Step3Lang">Step 3</s:String><s:String x:Key="ABSignalOutputReverseLangZ">AB signal output inversion(P03-21)</s:String><s:String x:Key="ForwardLimitLang">Forward limit</s:String><s:String x:Key="ConstrastNumLang">Code</s:String><s:String x:Key="UpAddLang">Up to increase</s:String><s:String x:Key="MPAOverTravelWarnLang">The motor rotation exceeds the allowable rotation amount. Please increase the allowable rotation amount setting and perform the mechine properties analysis again. If the allowable roration amount cannot be increased further, please reduce the excitation amplitude.</s:String><s:String x:Key="BuiltInBrakeResistancePowerLangZ">Built-in brake resistor power(P00-33)</s:String><s:String x:Key="MonitorFileLang">General Monitoring File</s:String><s:String x:Key="CurrentParaLang">current parameter table</s:String><s:String x:Key="CloseEnabledWarnLang">You can't do this in a state of energy. Please turn off the operation!</s:String><s:String x:Key="G2UseP01-21LangZ">1: Use P01-21 setting torque to stop motor, then use P01-20.nnnX setting</s:String><s:String x:Key="TriggerModeLang">Trigger Mode</s:String><s:String x:Key="SpeedCommandAnlogReversalLangZ_Line">Speed command analog quantity inversion(P04-01)</s:String><s:String x:Key="ExcelToXmlLang">Excel file to XML file</s:String><s:String x:Key="ControlCommandSourceSelectLangZ">ControlCommandSourceSelect(暂无)</s:String><s:String x:Key="OperatorStepLang">Step 1:
JOG start signal has two ways:use DI input and enable, start signal integration.
        
1.Uncheck:start signal and enable signal are integrated.
        
2.Check:select a DI port as the start signal of internal position, and then power on again to make the parameter take effect.
        
(1) In case of alarm AL.102,please go to "Parameter Setting"-&gt;"P06_IO_parameter" table to check whether DI1-DI8 has DI port repeatedly set,modify and power on again.
        
(2) If DI port has been set and needs to be modified,please modify it in "Parameter Setting"-&gt;"P06_IO_parameter".
        
Step 2:
Set relevent motion parameters for JOG
        
Strp 3:
Start:click "Start" button and input signal to the DI port set according to "Step 1" to make the motor operate.
Stop:click "Stop" button to immediately stop the movement.</s:String><s:String x:Key="IOSetErrorLang">Please set parameter P06-03=16,P06-05=15,P06-07=14,P06-09=13.</s:String><s:String x:Key="AllWarnInfoLang">Warning info check</s:String><s:String x:Key="RegenerativeBrakeTip2Lang">Not in regenerative braking state</s:String><s:String x:Key="SpeedCommandDigitalSetPointLangZ">Speed command digital set value(P04-02)</s:String><s:String x:Key="ScopeInitFailedLang">The oscilloscope initialization configuration failed.Please check the configuration file is correct?</s:String><s:String x:Key="ParamSetFileLang">Parameter Setting File</s:String><s:String x:Key="ReverseLimitLang">Reverse limit</s:String><s:String x:Key="MPANotchFilterSetLang">Notch Filter Set</s:String><s:String x:Key="OutputPulseDivisionRatioDenominatorLangZ">Incremental encoder output frequency division ratio denominator(P03-23)</s:String><s:String x:Key="OkLang">OK</s:String><s:String x:Key="TorqueControlLangZ">2：Torque ControlMode</s:String><s:String x:Key="Machine515">Linear Servo</s:String><s:String x:Key="MotorOverload2TipLang">The motor is overloaded</s:String><s:String x:Key="DownDefaultWarnLang">Do you want to restore all parameters to factory settings?</s:String><s:String x:Key="PSTMeasureInertiaLang">Measure</s:String><s:String x:Key="DO13">0x13(19)：增益1有效</s:String><s:String x:Key="NoBusStepperTypeLang">Standard</s:String><s:String x:Key="VersionSelectQLang">Please select the version of integrated servo:</s:String><s:String x:Key="PSTWarningReLang">A servo fault or warning has occurred, unable to start the auto-tuning function</s:String><s:String x:Key="DO09">0x09(9)：速度限制中</s:String><s:String x:Key="StartOKLang">Start successfully!</s:String><s:String x:Key="DI08">0x08(8): Reverse External Torque Limit Toggle</s:String><s:String x:Key="DI18">0x18(24): Invert Torque Simulation Command</s:String><s:String x:Key="LanguageSwitchWarnLang">系统切换语言，将自动重启。请问是否切换？
 The system will restart automatically when switching languages.Do you want to switch?</s:String><s:String x:Key="PrepartionSamLang">Sampling is in preparation...</s:String><s:String x:Key="InertiaIdentifyReLang">Explanation:
Identify the load inertia of the motor and enter it into the parameters.

Click the start button, and the system will automatically read the relevant parameters. If modification is needed, manually modify them and click the write button. If no modification is needed, click the next button directly.

After clicking the next button, click the enable button and repeatedly click the rotate button until the write button is abled. After writing, the inertia identification is completed.</s:String><s:String x:Key="AllParaInfoLang">All Parameters detail info check</s:String><s:String x:Key="IOChnDesLang">IO sampling items have been selected:</s:String><s:String x:Key="AverageLang">Average</s:String><s:String x:Key="AbPTPLang">Absolute PTP</s:String><s:String x:Key="PowerAgainLang">Power on again</s:String><s:String x:Key="PSTModeSelectItem2ReLang">Perform positioning optimization adjustments. In addition to gain, auto-tune parameters such as model following, notch filters, intermediate frequency suppression, etc.</s:String><s:String x:Key="IOTitleLangZ">&lt; IO Setting &gt;</s:String><s:String x:Key="LineInchRunLang">Inch</s:String><s:String x:Key="SpeedLang">Speed</s:String><s:String x:Key="Assignment5Lang">Task 5</s:String><s:String x:Key="AssignmentParamGroupLang">Task parameter group</s:String><s:String x:Key="PSTActionEvaluationGainSearchingReLang">Action evaluation gain Searching, please wait......</s:String><s:String x:Key="OpenEnableLang">Open Enabled</s:String><s:String x:Key="STM32FirmwareLang">ARM Firmware:</s:String><s:String x:Key="DownloadParaLang">Download Parameter:</s:String><s:String x:Key="MPAPhaseLang">Phase (°)</s:String><s:String x:Key="MotorConfigLang">Motor configuration</s:String><s:String x:Key="FactorySetLang">Factory setting</s:String><s:String x:Key="Firmware1Lang">Firmware 1:</s:String><s:String x:Key="WriteSleepTimeLang">1.Default write EPROM time:</s:String><s:String x:Key="DownloadAllLang">Download All Parameters</s:String><s:String x:Key="ValidAtRisingEdgeLangZ">3: Rising edge triggered</s:String><s:String x:Key="Step1Lang">Step 1</s:String><s:String x:Key="ReverseSpeedLimitLangZ">Reverse speed limit(P04-07)</s:String><s:String x:Key="NoConnectLang">No Communication.</s:String><s:String x:Key="SpeedCodeLang">Speed Command(/rpm)</s:String><s:String x:Key="DataBitsLang">Data Bit</s:String><s:String x:Key="VersionSelectLang">Version Selection</s:String><s:String x:Key="ParamUpFaileLang">Parameter update failed.</s:String><s:String x:Key="RightJOGStopLang">Right JOG is stop.</s:String><s:String x:Key="AutoComLang">Automatic Zero Drift Compensation</s:String><s:String x:Key="OutputPulseDivisionRatioNumeratorLangZ">Incremental encoder output frequency division ratio numerator(P03-22)</s:String><s:String x:Key="RegenerativeBrakeLang">Regenerative Brake</s:String><s:String x:Key="PositionModeSettingBtnLangZ">PositionMode
Setting</s:String><s:String x:Key="MotorInstallationGuideRe_2Lang">Explanation:
Motor installation guide provides setting for many basic parameters, which can help you quickly configure the functions of the driver.
    
Motor installation guide steps:
    
First: After confirming that the environment has no abnormalities, click the start button to enter the configuration interface.
    
Second: Control Mode Select
Different control modes correspond to different parameter settings. After selecting the desired control mode, click the next button.
    
Third: Parameter Setting for Corresponding Control Mode
Based on the control mode selected in the previous step, modify the corresponding parameters as needed. After making the changes, click the next button.
    
Fourth: Rotation Direction and Frequency Division Output Setting
Setting the rotation direction and parameters related to frequency division pulse output. After completing the settings, click the next button.
        
Fifth: DI and DO Signal Setting
Set the functions and trigger conditions of the DI port, and the functions and open/close status of the DO port. After completing the settings, click the next button.
        
Sixth: Brake Resistor Setting
Set whether to use a regenerative resistor, choose between using an internal or external resistor, and set the corresponding resistance value and power of the regenerative resistor. After completing the settings, click the next button.
    
Seventh: All Parameters
This interface allows you to check all the parameters you have set. You can verify them one by one. After confirming they are correct, click the write button. Once the bottom of the interface indicates that writing is complete, the installation wizard parameter setting is finished.</s:String><s:String x:Key="IsStartFFTLang">Do you want to start FFT analysis?</s:String><s:String x:Key="G2UseP01-22LangZ">2: Use P01-22 setting time to stop motor, then use P01-20.nnnX setting</s:String><s:String x:Key="LangDeleteSuccLang">Language delelted successfully,need to restart the software.Do you want to restart the software?</s:String><s:String x:Key="InertiaRatioBLang">Moment of inertia ratio</s:String><s:String x:Key="SetValueLang">Set_Value</s:String><s:String x:Key="TorqueLimitationTip2Lang">No motor torque limit.</s:String><s:String x:Key="AttitudeSpeedControlLangZ">4：Position/Speed ControlMode</s:String><s:String x:Key="ExternalBrakeResistorPowerLangZ">External brake resistor power(P00-31)</s:String><s:String x:Key="ElectronicGearRatioLangZ">Electronic gear ratio</s:String><s:String x:Key="TriCondi0Lang">Failure trigger</s:String><s:String x:Key="MonitoringLang">Monitoring...</s:String><s:String x:Key="MonitorAddressLang">Adress</s:String><s:String x:Key="Goal2Lang">Goal 2</s:String><s:String x:Key="UpSuccessLang">Update succeeded</s:String><s:String x:Key="PSTOpenReLang">《Parameter Self-tuning》 Precautions: 
    1. Please preform the operation where an emergency stop(power OFF) is possible.
        During adjustment, the response can change significantly, so be sure to perform it in a state where an emergency stop(power OFF) is possible.
    2. Ensure safety near the operating parts.
        Thoroughly confirm that there is no danger in the movement range and direction when the motor operates before execution.
        Additionally, for safety reasons, set ptotective operations such as overtravel limits.
    3. Check for any position deviation before operation.
        Before running, be sure to perform a homing reset to return to a safe position.
        Operating with a position offset can lead to runaway situations, which are extremely dangerous.
    4. Confirm system safety when used in a vertical axis state.
        When using this function on a vertical axis, ensure that the system will not free-fall enven when the servo is off.
    </s:String><s:String x:Key="PSTModeSelectItem2Lang">2: Position mode</s:String><s:String x:Key="MutiParamDownTipLang">Prompt:The minimum permission for downloading all parameters is 2 level authority.If the permission is lower than the 2 level authority,it will be automatically converted to the 2 level authority.</s:String><s:String x:Key="SetUpLangZ">SetUp</s:String><s:String x:Key="SpeedCommandSelectionLangZ_Line">RPM command source(P04-00)</s:String><s:String x:Key="SetpointOfP05-03LangZ">1: P05-03 setting value</s:String><s:String x:Key="Channel3Lang">Channel 4</s:String><s:String x:Key="ConfigurationLang">Configuration</s:String><s:String x:Key="PowerOnDILangZ">Assignment of Power-on active DI functions(P06-00/P06-01)</s:String><s:String x:Key="TriCondiLang">Trigger Condition</s:String><s:String x:Key="DPMinimumAlarmLang">Lower Limit</s:String><s:String x:Key="ServoEnableLang">Servo Enable</s:String><s:String x:Key="OperateSetLang">Operate Setting</s:String><s:String x:Key="PSTServoNotEnabledWarnLang">Servo not enabled, can't start this function</s:String><s:String x:Key="Assignment14Lang">Task 14</s:String><s:String x:Key="AddQuickMonLang">Add to Custom Monitor</s:String><s:String x:Key="DO14">0x14(20)：Z信号输出</s:String><s:String x:Key="LanguageCodeLang">Language code:</s:String><s:String x:Key="TimeDeltaLang">Time differnces</s:String><s:String x:Key="StepperResetLang">Parameter Reset</s:String><s:String x:Key="DO03">0x03(3)：伺服准备好</s:String><s:String x:Key="PSTStructionSelectItem3ReLang">Suitable for adjusting high-rigidity mechanisms such as rigid body systems.</s:String><s:String x:Key="AnalogQuantity1VTorqueValueLangZ">Analog 1V corresponding torque value(P06-43)</s:String><s:String x:Key="CounterClockWiseLangZ">0: Counterclockwise is the positive way</s:String><s:String x:Key="DPPowerOutageAlarmLang">Power Outage</s:String><s:String x:Key="NoEnabledLang">Not enabled</s:String><s:String x:Key="PSTVibrationMeasuringReLang">Vibration measuring, please wait.....</s:String><s:String x:Key="HideLang">Hide setting</s:String><s:String x:Key="DPAlarmStatusLang">Alarm Status:</s:String><s:String x:Key="DownAllParamTipLang">Tip: click "download all parameters" buttons and download the imported file parameters.</s:String><s:String x:Key="PSTWritingReLang">Factory parameters writing, please wait</s:String><s:String x:Key="InternalPosOK3Lang">DI port has been set,please go to "Parameter Setting" page for modification.</s:String><s:String x:Key="DI1D">0x1D(29): Pole Detection Request Signal</s:String><s:String x:Key="CustomConnectLang">Custom Connection</s:String><s:String x:Key="MonitorLang">Monitor</s:String><s:String x:Key="Param1Lang">Parameter file：</s:String><s:String x:Key="NF2Lang">Notch Filter 2</s:String><s:String x:Key="PSTLowFrequencyVibrationSuppressionLang">Lf vibration suppression</s:String><s:String x:Key="IOSettingLangZ">Input And
Output</s:String><s:String x:Key="MultilySelectLang">(Multiple options)</s:String><s:String x:Key="ImportAxisLang">Import axis</s:String><s:String x:Key="SrcSetLang">Import file settings</s:String><s:String x:Key="DeveloperModeLang">Developer Mode</s:String><s:String x:Key="InternalContrastLang">Internal contrast</s:String><s:String x:Key="G2UseP01-20nnnXLangZ">0: Use P01-20.nnnX setting</s:String><s:String x:Key="ShutdownModeSettingLangZ">Shutdown
mode</s:String><s:String x:Key="AnalogQuantity1VTorqueValueUnitAndRangeLangZ">(Unit: % ____ Range: 0-100)</s:String><s:String x:Key="AssignmentSetLang">Task settings</s:String><s:String x:Key="MPAFrequencyLang">Frequency (Hz)</s:String><s:String x:Key="DO10">0x10(16)：使能状态</s:String><s:String x:Key="ConstrastNameLang">Name</s:String><s:String x:Key="EditCustomGroupLang">Edit custom group</s:String><s:String x:Key="AutoCommCloseLang">In communication...
Are you reconnecting?</s:String><s:String x:Key="InstructionUnitLangZ">Instruction Unit</s:String><s:String x:Key="Position_SpeedSettingLangZ">Position/Speed mode parameter setting</s:String><s:String x:Key="ModeLang">Mode</s:String><s:String x:Key="ParaAuthorityLang">Authority</s:String><s:String x:Key="LockingTorqueLang">Locking torque:</s:String><s:String x:Key="DownloadToolTipLang">Download all parameters to the drive.</s:String><s:String x:Key="MoreSetLang">More settings</s:String><s:String x:Key="FreedomDPStopLang">Stop Freedom</s:String><s:String x:Key="ForwardSpeedLimitLangZ">Forward speed limit(P04-06)</s:String><s:String x:Key="LocateCompleteRangeLangZ">Locate Complete Range(P03-06)</s:String><s:String x:Key="PSTInertiaIdentifyReLang">Inertia identifying, please wait......</s:String><s:String x:Key="AllParamDownOkLang">All parameter are downloaded successfully.Power on an restart.</s:String><s:String x:Key="zh-CNLang">简体中文</s:String><s:String x:Key="SerialPortNumLang">Serial Number</s:String><s:String x:Key="WritingInProgressLangZ">Writing in progress...</s:String><s:String x:Key="AntiExternalTorqueLimitRangeLangZ_Line">(Range：-300-0)</s:String><s:String x:Key="HorizCursoerLang">Horizontal Cursor</s:String><s:String x:Key="Machine513">Integrated servo</s:String><s:String x:Key="Machine523">Direct drive servo DD</s:String><s:String x:Key="ScopeFileLang">Scope file</s:String><s:String x:Key="AddParaDesLang">Double-click or click "Move Right" to add parameters.</s:String><s:String x:Key="WarningLang">Warning</s:String><s:String x:Key="DoublePulseCommand1LangZ">3: Double pulse command(CW+CCW)</s:String><s:String x:Key="AlarmResLang">Aalarm source</s:String><s:String x:Key="CurrentValueLangZ">Current value</s:String><s:String x:Key="DInputLangZ">DI input setting</s:String><s:String x:Key="OnlineStatusLang">Communication Sataus:</s:String><s:String x:Key="TriChLang">Trigger Channel</s:String><s:String x:Key="PSTModeSelectItem1ReLang">Perform standard gain adjustments. In addition to gain, auto-tune the notch filter, intermediate frequency suppression, etc.</s:String><s:String x:Key="MotorSpeedLang">Motor speed</s:String><s:String x:Key="MutiStopReleaseLang">Emergency stop Release</s:String><s:String x:Key="Channel5Lang">Channel 6</s:String><s:String x:Key="SetValueLangZ">Set value</s:String><s:String x:Key="PSTFinishLang">Finish</s:String><s:String x:Key="SpeedModeLang">Speed Mode</s:String><s:String x:Key="AutoStopConnectLang">Stop Connection</s:String><s:String x:Key="SpeedTorqueControlLangZ">3：Speed/Torque ControlMode</s:String><s:String x:Key="IO524SetErrorLang">Please set parameter P06-14.01=0x11,P06-15.01=0x12.</s:String><s:String x:Key="SeroTypeSelectWarnLang">The detected drive model series selection is incorrect. Would you like t o continue connecting?</s:String><s:String x:Key="RightRelativeRunLang">Right in realtive motion...</s:String><s:String x:Key="PositionReachTip2Lang">Position not reached.</s:String><s:String x:Key="TriLevelLang">Trigger Level</s:String><s:String x:Key="ImportLandDicLang">Import language directory:</s:String><s:String x:Key="FitiewLang">Fit to view</s:String><s:String x:Key="SettingLang">Setting</s:String><s:String x:Key="NoAlarmLang">No Alarm</s:String><s:String x:Key="MinValueLang">Mininum</s:String><s:String x:Key="ParaFileLang">parameter file</s:String><s:String x:Key="WaveFormFileLang">WaveFrom File</s:String><s:String x:Key="OTUseP01-20nnnXLangZ">0: Use P01-20.nnnX setting</s:String><s:String x:Key="PSTStartSetLang">Start</s:String><s:String x:Key="MPAP28EnableWarningWarnLang">Servo not ready, this function cannot be executed.</s:String><s:String x:Key="PSTParameterSelftuningFaultLang">Parameter Self-tuning failed</s:String><s:String x:Key="CommOpenFailedLang">The current serial port cannot be opened.Please check the port configuration.Possible errors:
1.The serial port may have been occupied.
2.The serial port cannot be detected.
3.Other mistakes.</s:String><s:String x:Key="StopDecSpeedLang">Emeragency stop and deceleration</s:String><s:String x:Key="AdminiAuthorityLang">Administrator authority</s:String><s:String x:Key="ForwardSpeedLimitUnitAndRangeLangZ_Rotate">(Unit：rpm ____ Range：0-6000)</s:String><s:String x:Key="AllParaLangZ">ParameterList</s:String><s:String x:Key="ReverseSpeedLimitUnitAndRangeLangZ_Line">(Unit：mm/s ____ Range：-6000-0)</s:String><s:String x:Key="ZSignalLevelWidthLangZ">Z signal voltage level width(P01-35)</s:String><s:String x:Key="OperatorWarnHeaderLang">Operation precautions</s:String><s:String x:Key="AlarmContentLang">Alarm Content</s:String><s:String x:Key="SecondAuthorityLang">2 level authority</s:String><s:String x:Key="ReminderNullLang">There are no different values in the comparison table.</s:String><s:String x:Key="MPAWorkingLang">Analyzing...</s:String><s:String x:Key="SpeedTorqueModeSettingBtnLangZ">Speed
Torque Mode</s:String><s:String x:Key="AddrCahngedLang">The slave address has been modified to</s:String><s:String x:Key="VertCursorLang">Vertical Cursor</s:String><s:String x:Key="ImportMachineNumLang">The imported parameter file is different from the currently produced parameter file.</s:String><s:String x:Key="MultiParamDownLang">Parameter download</s:String><s:String x:Key="ReverseSpeedLimitUnitAndRangeLangZ">(Unit: rpm ____ Range: -6300-0)</s:String><s:String x:Key="TorqueReadyLang">OK</s:String><s:String x:Key="NoSamLang">No sample.</s:String><s:String x:Key="ConnectSetErrorLang">Communication connection setting error,please reset.Possible errors:1.The serial port number is empty.
2.The slave address is empty.
3.Other errors.</s:String><s:String x:Key="FaultingLang">Fault</s:String><s:String x:Key="DI06">0x06(6): P Command Input</s:String><s:String x:Key="Analog1VSpeedValueLangZ">Analog 1V correspondding speed value(P06-40)</s:String><s:String x:Key="SelectImportFileLang">Please select the axis from which you want to import files(multiple options):</s:String><s:String x:Key="DPRunLang">Running</s:String><s:String x:Key="SelectDeleteLangLang">Please select the language you want to delete:</s:String><s:String x:Key="OTUseP01-21FreeLangZ">2: Use P01-21 setting to stop motor, then enter free run state</s:String><s:String x:Key="LockOneScrewTimeLang">Time for locking one screw(s):</s:String><s:String x:Key="CustomizeLang">Customize</s:String><s:String x:Key="DI0D">0x0D(13): Multi-Speed Selection 1</s:String><s:String x:Key="CommandTypeLang">Command TypeLang</s:String><s:String x:Key="EditeAuthorityLang">Edit permission</s:String><s:String x:Key="Assignment15Lang">Task 15</s:String><s:String x:Key="AddMultiAxisLang">Add new axis (offline mode)</s:String><s:String x:Key="DO0F">0x0F(15)：反向超程中</s:String><s:String x:Key="DescentEdgeCountingLangZ">1: Descent edge counting</s:String><s:String x:Key="UserAuthorityLang">User authority</s:String><s:String x:Key="SoftwareOpLang">Software operation</s:String><s:String x:Key="Gr1FailureStopMethodLangZ">Gr.1 Failure stop method(P01-20.0)</s:String><s:String x:Key="LocationInstructionLangZ">Location instruction(P03-01.1)</s:String><s:String x:Key="LeftJOGRunLang">Left JOG...</s:String><s:String x:Key="MotorPowerLang">Motor Power:</s:String><s:String x:Key="PSTStopSetLang">Stop</s:String><s:String x:Key="DI1C">0x1C(28): Probe 2 Input Signal</s:String><s:String x:Key="DeleteCustomGroupLang">Delete custom group</s:String><s:String x:Key="LanguageVersion">English(US)</s:String><s:String x:Key="ParamEditWarnLang">Options and data in the table cannot be empty.
Select the edit format of the item:Data:Options Description.</s:String><s:String x:Key="PSTTrasmissionInertiaRatioReLang">An incorrect setting of the rotational inertia ratio may cause vibrations</s:String><s:String x:Key="UnKnowWarnLang">Unknown Alarm</s:String><s:String x:Key="WriteAllParamFailedLang">Set value beyond the scope.Error parameter:</s:String><s:String x:Key="ClockWiseLangZ">1: Clockwise is the positive way</s:String><s:String x:Key="CollectLang">Successive acquisition</s:String><s:String x:Key="DownloadCheckedLang">Download all the checked parameters</s:String><s:String x:Key="DPFloatingHighAlarmLang">Floating High Alarm</s:String><s:String x:Key="MotorParamConfigLang">Motion Parameter configuration</s:String><s:String x:Key="InputPulseLang">Input pulse(/P)</s:String><s:String x:Key="ParamLang">Parameter</s:String><s:String x:Key="CustomParaGroupLang">Custom Parameter Groups</s:String><s:String x:Key="ElectronicGearRatioSettingMethodLangZ">电子齿轮比设定方式</s:String><s:String x:Key="RepeatGoal1Lang">Repeat Goal 1</s:String><s:String x:Key="FSUseP01-22LangZ">2: Use P01-22 setting time to stop motor, then use P01-20.nnnX setting</s:String><s:String x:Key="ImportUserManLang">Import the user manual:</s:String><s:String x:Key="BackLangZ">Back</s:String><s:String x:Key="PSTFactoryModeLang">Use factory setting to adjust</s:String><s:String x:Key="en-USLang">English(US)</s:String><s:String x:Key="JMCSoftTitleLang">JMCServoStepperStudio</s:String><s:String x:Key="SpeedCommandAnlogReversalLangZ">Speed command analog quantity inversion(P04-01)</s:String><s:String x:Key="PSTNowModeLang">Now Mode</s:String><s:String x:Key="SpeedModeSettingBtnLangZ">SpeedMode
Setting</s:String><s:String x:Key="AssignmentNumLang2">Task Num:</s:String><s:String x:Key="DI03">0x03(3): Forward Overtravel</s:String><s:String x:Key="DI13">0x13(19): Gantry Synchronized Activation</s:String><s:String x:Key="SaveParasLang">Save Parameter</s:String><s:String x:Key="MaxScrrenLang">Full Scrren</s:String><s:String x:Key="MonitorNameLang">Item</s:String><s:String x:Key="QuikSetLang">Quickly Channel</s:String><s:String x:Key="DI05">0x05(5): ControlMode Change</s:String><s:String x:Key="DI15">0x15(21): Home Switch Signal</s:String><s:String x:Key="SaveAsAllCustomGroupLang">Save As all custom groups</s:String><s:String x:Key="ValidAtRisingAndFallingEdgeLangZ">4: Both rising and falling triggered</s:String><s:String x:Key="PulseDirectionCommendLangZ">1: Pulse+Direction Command</s:String><s:String x:Key="PSTEnterReLang">Do you want to enable parameter self-tuning?</s:String><s:String x:Key="G1UseDBReleaseDBLangZ">1: Use DB to stop motor, then release DB</s:String><s:String x:Key="ExecuteLang">Execute</s:String><s:String x:Key="SlipperToothSignalLang">Slipper tooth signal</s:String><s:String x:Key="ControlTitleLangZ">&lt; Control Mode &gt;</s:String><s:String x:Key="IOChannelLang">IO Channel</s:String><s:String x:Key="PSTStartFuncLang">Start Function</s:String><s:String x:Key="Channel6Lang">Channel 7</s:String><s:String x:Key="noCommunicationLang">Communication not Connected.</s:String><s:String x:Key="Built-inMulti-SegmentSpeedLangZ">3: Built-in Multi-Segment speed instruction</s:String><s:String x:Key="MPANotchFilterFrequencyLang">Notch Filter
Frequency</s:String><s:String x:Key="ParameterSettingLang">Parameter Setting</s:String><s:String x:Key="SlaveAddressLang">Slave Address</s:String><s:String x:Key="PasswordLang">Password:</s:String><s:String x:Key="SmoothnessLang">Smoothness</s:String><s:String x:Key="ShutdownModeTitleLangZ">&lt; Shutdown Mode Setting &gt;</s:String><s:String x:Key="CurrAlarmNumLang">Current alarm number:</s:String><s:String x:Key="Machine527">Integrated</s:String><s:String x:Key="DigitalTorqueSettingValueLangZ">Digital Torque Setpoint Value(P05-03)</s:String><s:String x:Key="DI1F">0x1F(31): Reserved</s:String><s:String x:Key="Analog1VSpeedValueUnitAndRangeLangZ">(Unit: rpm ____ Range: 0-2000)</s:String><s:String x:Key="OfflineLang">Offline</s:String><s:String x:Key="RePTPLang">Relative PTP</s:String><s:String x:Key="NewConfigFileFailedLang">File import failed!Please check the imported file or file name.</s:String><s:String x:Key="TorqueControlSpeedLimitLangZ_Line">Torque mode speed limit set value(P05-02)</s:String><s:String x:Key="ImportParamLangLang">Import the system configuration file for the language</s:String><s:String x:Key="InertiaLeaveLang">The current 'Close Enabled' operation will close this page.Would you like to proceed with this operation?</s:String><s:String x:Key="UseAin_2LangZ">1：Use Ain_1(Torque Analog Command)</s:String><s:String x:Key="TorqueSimulationCommandSelectionLangZ">Torque Simulation command select(P06-05.1)</s:String><s:String x:Key="DeleteMultiAxisLang">Delete this axis (offline mode)</s:String><s:String x:Key="Assignment1Lang">Task 1</s:String><s:String x:Key="ParamSaveOkLang">The parameter file was saved successfully.</s:String><s:String x:Key="IOInputLang">IO input</s:String><s:String x:Key="DescriptionEditLang">parameter specification</s:String><s:String x:Key="SystemParamSetLang">System parameter setting</s:String><s:String x:Key="ConnectionFailedLang">Communication failed.Please check that the communication configuration is correct.</s:String><s:String x:Key="FactoryConstrastLang">Contrast with factory Settings.</s:String><s:String x:Key="StartImportLang">Start Import</s:String><s:String x:Key="PositionSpeedControlTitleLangZ">&lt; Position/Speed Mode &gt;</s:String><s:String x:Key="BrakingResistanceTitleLangZ">&lt; Braking Resistance Setting &gt;</s:String><s:String x:Key="CurrentAmplitudeLang">Current Amplitude</s:String><s:String x:Key="AllSelectLang">All select</s:String><s:String x:Key="PowerOnValidDIFunctionAllocationLangZ">PowerOnValid
DI Function</s:String><s:String x:Key="ParaIsCheckedLang">(with the checkedmark)</s:String></ResourceDictionary>